TWS forks are often used on high-capacity forklift trucks and in port logistics. They are mounted by means of an upper hook and a lower lug/bolt. The term Terminal West suspension is also common. There are no standardized dimensions for the suspension of TWS forks.
However, the VETTER database already contains a wide range of variants. Don’t hesitate to contact us!
Slider
Subnavigation
TWS forks
Product benefits / Quality features
OptimaForkHeel: Up to three times the service life and a low level of deflection
Standard QualityForks by VETTER are delivered with the OptimaForkHeel with its additional wear zone to provide up to three times the service life, a low level of deflection and an optimum stress distribution.
High level of safety through tried-and-tested forks attachment
The attachment of the fork to the fork carriage is exceedingly important. After all, part of the load hangs directly on this, making it crucial for the operating reliability. No matter which type of attachment you require: All VETTER suspensions have been optimised with regard to their load-bearing capacity and weld design and thus guarantee the highest degree of safety.
Optimum use due to a high degree of dimensional accuracy and lateral pressing of flanks
VETTER forks stand out due to a high degree of dimensional accuracy and narrow tolerances. During the manufacturing process the flanks are pressed in a separate step to guarantee that they are ideal for the application and facilitate the use of accessories (e.g. fork extensions).
High level of mutual compatibility due to identical fork tip heights
Every fork is individually straightened out to the same angle, generally 90°. The fork tip height is thus identical and low wear rates guaranteed. There are no tip deviations, so all forks can be combined with each other. The effort of aligning forks in pairs is eliminated.
FlexHeat: The ideal heat treatment for your application
It isn’t visible, but heat treatment plays a major role for the application, safety and the service life. The heat treatment is performed under strictly controlled temperature conditions during the entire manufacturing process and is always selected to perfectly suit the material, the load-bearing capacity, the dimensions and the application.
The best steel for best forks
Only the best steel ensures that the fork is able to withstand the highest loading. And to guarantee this, VETTER has constantly developed new steel qualities over the decades.
The steel used has been optimised especially for VETTER quality forks and precisely tailored to meet the requirements of the specific applications. This guarantees the necessary toughness, purity, hardness, workability and ability to withstand severe long-term stress. Without compromises!
And to ensure that this remains the case, the VETTER materials laboratory constantly examines and improves the materials used and carries out research into new materials.
Comprehensive welding quality requirements certified in accordance with ISO 3834-2
The welding of the suspensions is an important, safety-relevant process when manufacturing forks. The strict quality requirements at VETTER are thus fully certified according to ISO 3834-2. Every single welder is trained extensively and checked regularly on the basis of welding samples.
This is what you can trust on!
Production on basis of ISO 2330 (min. triple static safety and 1,000,000 load cycles with 25 % overload)
ISO 9001 QualityManagement
ISO 14001 EnvironmentManagement
ISO 50001 EnergyManagement
Certified by leading OEMs in the forklift, construction and agricultural industry
QualityProduction made in Germany
Share: